eBay Classifieds » All ads » Jobs » 

inspector in Los Angeles

(1-20 of 52 ads)
View as:
Categories
  1. Quality Inspector at ACE Clearwater Enterprises

    The candidate must have a background in inspection of sheet metal formed hardware, detail parts (sheet metal & machined), sub-assemblies, assemblies &

  2. CMM Programmer/Operator/Inspector at Sincerus Solutions

    CMM Inspector performs the following duties:. The CMM Inspector provides the technical interface between the programming and operations organizations as it...

  3. Junior Mechanical Inspector at Quality Fabrication Inc.

    Quality Fabrication Inc. is a mid-sized "Precision Sheet Metal Fabrication and Machining company" located in Chatsworth, CA - 91311. An AS9100 certified

  4. Laboratory Director at Established Medical Practice

    In addition, the position assists inspectors during regulatory audits at the Center by performing diagnostic semen analysis, validates, and performs any...

  5. Intern/Co-op - Refining Metallurgical Engineering at Marathon Petroleum Corporation

    You will support the Inspectors through research and data gathering; MARATHON PETROLEUM COMPANY....

    Ads
    1. Dimensional Inspector - 6800

      Dimensional Inspector-TalentZok - 6800 TalentZok specializes in recruiting professional talent. We are currently seeking a Dimensional Inspector for a leading and growing firm in Burbank, Ca A Dimensional Inspector is responsible for inspecting parts in-process and 1st articles using surface plate setups with standard measuring equipment. May also be asked to inspect raw material received ...

    1. Building Inspector at Willdan & Associates

      Building Inspector - Anaheim, CA. We currently have an opening for an ICC Certified Building Inspector based out of our Anaheim, CA office....

    1. NDT Level II Inspectors - 159488

      Category: MANJob Title: NDT Level II InspectorCity: HawthorneState: CARate: Depending on expereinceDuration: 4 MonthsDescription: Chipton-Ross is seeking a NDT Level II Inspector for an opening in Hawthorne, CA.REQUIRED EXPERIENCE:• A minimum of 5 years of experience as a Level II Non-Destructive Test technician.• Preferred Skills and Experience:• Experience in one or more of the following ...

    1. FEMA-Disaster Response Construction Inspectors at Dewberry

      FEMA-Disaster Response Construction Inspectors. Dewberry is currently searching for highly qualified Construction Inspectors for our on-call team....

    1. Surface Plate Inspector - 159410

      RESPONSIBILITIES:Responsible for the receiving, storing, and issuing of standard hardware, raw material, purchase parts, machined details, and assemblies to support manufacturing operations and other areas as required. Work from design drawings, CAD models, procedures, standards, specifications and other production documentation.• Performs receiving inspection on mechanical parts, components, ...

    1. Tower Technicians, Climbers, Inspectors & Crew Chiefs at EF&I Services Corp.

      EF&I Services Corp and Granger Telecom have several positions open for qualified experienced Tower Technicians, Climbers, Inspectors and Crew Chiefs....

    1. QC Inspector

      Entry level QC InspectorJob Purpose: Ensuring technical assessments and appropriate QA/QC processes are applied to all import and domestic parts received. Provide technical expertise in regulatory compliance and conduct regulatory reviews for potential parts compliance deficiencies. Develops and presents alternatives and findings in reports.Essential Functions · Process product following a ...

    1. Inspection-Pipeline Facilities Construction at NV5 Holdings, Inc.

      Chief Inspectors Utility Inspectors Welding Inspectors Coating Inspectors Electrical Inspectors Safety Inspectors Environmental Inspectors....

    1. CMM inspector $21 an hour firdt shift

       INspecro with CMM experiencefirst-SHIFT pay: $21 an hourdirect hire with benefits - 401K and health insurance company: www.work22.com Summary: Identify parts prior to inspection of castings, forgings, stampings, subassemblies and final assemblies and all kinds of space and aircraft machined parts hardware.     . Education and/or Experience: High school diploma or general education degree ...

    1. Construction Inspector - (Deep Excavation & Piles) at Civil Engineering and Construction Management Firm

      Civil Engineering and Construction Management Firm has immediate opening for a Construction Inspector with Transportation related experience such as:....

    1. Inspector-Dimensional

      Aerospace manufacturing company seeks Dimensional Inspector for the 1st shift. SUMMARYInspects forgings forged bars, rings and/or rough machined parts, to ensure conformance to specifications by assisting the Chief Inspector and performing the following duties, requiring direct supervision and training. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. ...

    1. QC Inspector at PAE

      The QC Inspector shall report directly to the QC/ESH Supervisor. Supporting the Most Exciting and Meaningful Missions in the World QC Inspector DUTIES:....

    1. Receiving Inspector

      Basic Qualifications: • High School Diploma or GED required. • 1+ yr. receiving inspection experience is required. • Requires the ability to read and interpret engineering drawings and specifications using ASME Y14.5. • Experience with Microsoft Word, Outlook and Excel. • Capable to operate a forklift and other related inventory equipment. • Experience within the Aerospace, automotive, ...

    1. Concrete Inspector ACI/PCI at KTA-Tator, Inc.

      Is aggressively seeking talented Concrete Inspectors with PCI Level I/II for East Coast opportunities. Come see what all the buzz is about!...

    1. CMM Inspector

      RESPONSIBILITIES:• Candidate will be responsible to work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and DCC CMM's.• Candidate will also be responsible to perform precision inspection verifications on mechanical parts, components, assemblies and materials. May include but is not limited to first article parts, in-process and ...

    1. HIGH VALUE Independent Property Inspector at Millennium Information Services, Inc.

      Millennium Information Services is currently recruiting for High Value inspectors. A variety of training managers and technical specialists will work with the...

    1. CMM Inspector - Aerospace - US Citizen - Flex Shift

      Layout InspectionCMM Operator/basic programming (PC-Dmis)Romer Arm experienceForging experience, a plusYou will apply measuring techniques to measure/analyze all features on any type of physical mechanical part.Practical experience using PCDMIS (CMM)Must have knowledge of GD+T and blueprint interpretation.CAD software experience CATIA V5Prior machinist experience a plusRequires 5 yrs ...

    1. Quality Inspector at PAE

      Certified Quality Inspector accreditation preferred. Quality Inspector responsibilities include but are not limited to the following:....

    1. Surface Plate Inspector - US Citizen - 2nd Shift

      Responsibilities: Performs receiving inspection on mechanical parts, components, assemblies and materials. May include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings. Utilizes inspection equipment such as height gage, Romer arm, micrometer and calipers, profilometers, etc. Approves or rejects ...

    1. SH16010 - QA/QC Civil Inspector (ADCO Approved) at Scalla Human Resources Consultancy

      QA/QC CivilInspector (ADCO Approved) – URGENTLY required for an Oil & Gas Company based in UAE. Candidate should have Bachelor’s degree or Diploma in Civil

    1. Quality Inspector - US Citizen - LOCAL

      As a quality inspector you will be responsible for being the last line of defense in assuring mission success. You will perform in-process inspections and verify that all key performance and design characteristics are met or exceeded during test preparation and Acceptance Testing. You will be working hands on with the most cutting edge rocket technology currently available and will be part of ...

    2. CMM Inspector Aerospace

      "Responsibilities:• Candidate will be responsible to work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and DCC CMM's.• Candidate will also be responsible to perform precision inspection verifications on mechanical parts, components, assemblies and materials. May include but is not limited to first article parts, in-process and ...

    3. Aerospace Quality Inspector - Surface Plate

      Responsible for the receiving, storing, and issuing of standard hardware, raw material, purchase parts, machined details, and assemblies to support manufacturing operations and other areas as required. Work from design drawings, CAD models, procedures, standards, specifications and other production documentation.Responsibilities:• Performs receiving inspection on mechanical parts, components, ...

    4. Auditor/QC Inspector

      TITLE: AUDITOR/QC INPECTOR POSITION OVERVIEW:Inspect, verify, and approve all BOM’s being built to assure all components, kits, bulletins, tags, and any other accessories are accounted for, being sure to log in new and used components accurately in order to maintain the inventory’s integrity.RESPONSIBILITIES: · Comply with all safety regulations and company policies.· Follow Written and ...

    5. Final Inspector I (2nd shift)

      Job Title: Final InspectorLocation: El Segundo, CADuration/Employment Type: 3-6 months Contract-to-HirePay Rate: $16/hourWork Schedule: Monday to Friday 2:30pm-11pmAmtec is recruiting for an industry leading manufacturing client that has an immediate need for a Final Inspector. The Final Inspector performs final inspection of parts and assemblies to verify conformance to Carlisle customer ...

    6. In Process Inspector I (2nd Shift)

      Job Title: In Process Inspector ILocation: El Segundo, CADuration/Employment Type: 3-6 months Contract-to-HireWork Hours: Monday to Friday 2:30pm-11pmPay Rate: $16/hourAmtec is recruiting for an industry-leading manufacturing client that has an immediate need for an In-Process Inspector I. The In-Process Inspector I performs inspections of product to verify conformance to customer ...

    7. Final Inspector Assembly

       Final Inspector  AssemblyNorth Hollywood.Ca.SECOND-SHIFTpay: $17 an hourdirect hire with benefits - 401K and health insurance company: www.work22.com Summary: Identify parts prior to inspection of castings, forgings, stampings, subassemblies and final assemblies and all kinds of space and aircraft machined parts hardware. Essential Duties and Responsibilities include the following. Other ...

    8. Certified Level II Liquid Penetrant Inspector

      JOB OBJECTIVE/ SUMMARY:   NDT-Non Destructive Testing Certified Level II Liquid Penetrant Inspector will perform DLP (Dye Liquid Penetrant) to check aerospace components to ensure that they are structurally sound.   Must be a certified NDT Level II Inspector (Penetrant) : Liquid Penetrant Inspection: 12 hour classroom training plus 400 hours OJT). Must re-certify every 5 years to NAS 410 ...

    9. Service Technician / Inspector for Real Estate Retrofitting

      Minimum 2 Years Plumbing Experience (Canoga Park)compensation: TBD based on experienceemployment type: full-time Job Title:Technician/Inspector - To perform property inspections and then retrofit properties that are in escrow for the mandatory safety and conservation codes that are required at point of sale.WE WILL TRAIN THE RIGHT APPLICANTAPPLICANTS SHOULD HAVE A MINIMUM OF 2 YEARS PLUMBING ...

    10. Senior Quality Inspector

      Position: Senior Quality InspectorShift: 8:00 am - 5:00 pmIndustry: AerospaceLocation: MonroviaFrequency:Part-timeDuration: 6-12 monthsRate: $25 per hour SQA Services is looking for a Senior Quality Inspector with expert industry experience and the ability to independently establish criteria without additional guidance or oversight. They require visual acuity and the ability to detect defects ...

      1. Sewer Repair Tech at LA Hydro Jet

        In addition, must know plumbing codes, work with inspectors, and replace commercial sewer and drain lines. Commercial Sewer Repair Tech Needed!...

      2. Temporary Electrical Inspector at Renewable Energy Systems Ltd.

        Acts as a lead inspector, training new inspectors in job functions and standards. RES currently has an Temporary Electrical Inspector position located at our...

      3. Field Labor Positions in USA at Renewable Energy Systems Ltd.

        RES is currently hiring in Lamesa, TX , Chapman Ranch, TX and Beaver, OK. Rattlesnake project , Brady, TX coming soon. To apply for any of the below

      4. Bridge Inspector at CSX

        Makes accurate and detailed bridge inspections to ensure safe train movement. Primary Activities and Responsibilities Climb bridges to thoroughly inspect

      5. Residential Insurance Inspector at EXL

        Overview: **** NOT A FULL TIME EMPLOYMENT POSITION **** Overland Surveys, a division of Overland Solutions (an EXL Company), is a leading provider of