Important Safety Tips: Avoid fraud by meeting all sellers in-person to pay for items. eBay Classifieds does not offer any transaction or payment services. Stay safe - read our safety tips.
Address:7017 Van Nuys Blvd Unit A, Van Nuys, CA 91405
DIRECTV SWM SL3S Slimline Dish Kit LNB Power Splitter and Dish
This is the SWM SL3S Kit. It converts your Slimline non (SWM) Dish to the New (SWM) Dish Technology from DIRECTV. This Kit is designed with an integrated single wire multiswitch (SWM) which allows you to have multiple satellites feeds at Once. This DIRECTV LNB Kit has 1 output for the new Slimline SWM dish from DIRECTV and all necessary components to convert your Slimline dish into a SWM Slimline dish (single wire multiswitch). This LNB is lighter and better looking. The Slimline encompasses three LNBs to receive 101°, 110°, 119° degree satellite, plus the new Ka satellite (99°, 103°) for local HD MPEG4 programming.
This DIECTV Slimline Dish has a Slim Profile, makes this dish aesthetically pleasing for areas with Home Owners Association
The SWM Dish is: 22.5 in. x 32.5 in.
The SWM Slimline Kit Includes the Azimuth/Elevation Mount
Includes long and short support bracket for stability
This DIRECTV Dish is to be used to pick up high definition local channel programming from DIRECTV
One outputs carrying satellite signal from all Five satellites in the sky
Heavy duty J-Mount with 2" outer diameter mast opening
Capable of receiving DIRECTV satellite signals on the Ku band (101°, 110°, 119°) and Ka band (99°, 103°)
LNB arm with LNBS attached extends 23.5" from the dish surface area
Including J-mount Mast, Dish Surface, Dish Back Assembly, Arm and Pole Attachment Braces
This Slimline SWM Satellite Dish from DIRECTV includes the Slim Profile Dish, Dish Mounts and all hard ware necessary to completethe installation.
This kit includes a SWM SL3S LNB "Single Wire Multiswitch" for a Slimline Dish.
It comes with its required power supply
This SWM kit also comes with the DIRECTV 4 Way Wide Band Switch
All hardware necessary to do the conversion.
To be used to pick up high definition local channel programming from DIRECTV
The SL3S SWM LNB is designed with an built-in 8-channel Multiswitch which allows you to have multiple satellite feeds at once. Coaxial RG6 cable not included.
Manufacturers may vary. All components are DIRECTV approved manufacturers.
One outputs carrying satellite signal from all 3 satellites in the sky
Capable of receiving DIRECTV satellite signals on the Ku band (101°, 99°, 103°)
SWM Power Suply
The PI-21 Power Inserter is designed for use on the SWiMLine dish.
Frequency Range: 2-2150Mhz
Can be used for the SWM-8
Output: 21v/ 1.2A max/ 25.2W max.
Input 100~120Vac/ 60Hz/ 0.6A max/ 30W max
Insertion loss 1.5db typ.
4-way (Green Label) Wide Band Satellite Splitter, One Port DC Path (Indoor/Outdoor)
500mA DC passing from any output to input
Diode steered protection
Grounding port provided
High isolation between outputs
LNB is A low-noise block converter (LNB, for low-noise block) is the (receiving or downlink) antenna of what is commonly called the parabolic satellite dish commonly used for satellite TV reception. It is functionally equivalent to the dipole antenna used for most other TV reception purposes, although it is actually waveguide based. Whereas the dipole antenna is unable to adapt itself to various polarization planes without being rotated, the LNB can be switched electronically between horizontal and vertical polarization reception. The LNB is usually fixed on or in the satellite dish, for the reasons outlined below. The corresponding component in the uplink transmit link is called a Block upconvert (BUC).
Satellites use comparatively high radio frequencies to transmit their signals.