Large Aerospace company seeks for Dimensional Inspector to work the 2nd shift.
Inspects forgings forged bars, rings and/or rough machined parts, to ensure conformance to specifications by assisting the Chief Inspector and performing the following duties, requiring direct supervision and training.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. In performing functions, duties or tasks, employees are required to know and follow safe work practices, and to be aware of Company policies and procedures related to job safety, including safety rules and regulations. All functions, duties or tasks are to be carried out in an honest, ethical and professional manner, and to be performed in conformance with applicable Company policies and procedures. In the event of uncertainty or lack of knowledge of Company policies and procedures, employees are required to request clarification or explanations from superiors or authorized company representatives.
Reads blueprints or engineering specifications to obtain product information such as specified material, surface finish, and dimensions.
Compares surface finish of workpiece to finish on set of standard blocks making fingertip touch comparison to ensure production of specified surface finish.
Measures dimensions such as length, height, and distance, between reference points to ensure product meets specifications.
Locates reference point on part and measures dimensions such as angle, arc, and radii.
Reports findings to Inspection Supervisor and, if necessary, write Inspection Deviation Report (IDR) if parts are not in conformance.
Sets up and tries out inspection equipment to ensure accuracy.
Substitutes known values such as dimensions from blueprints into standard formulas and solves for unknown quantities to determine dimensions not specified in blueprints.
Sets up portable CMM and related software.
Uses forklifts and cranes to move heavy parts.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
One year certificate from college or technical school; or one to three years related experience and/or training; or equivalent combination of education.
Important Safety Tips: You should find out as much as you can about the company. Meet your prospective employers/employees face to face. You should NOT have to provide your bank account details. Stay safe - read our safety tips.